Read the composition as it flows.
Spectrally™ puts a Raman probe straight into your urea, UAN/RSM and AUS 32 (DEF/AdBlue) process - inline, meaning in the reactor, pipeline or mixer itself, with no sampling. Urea concentration, nitrate, ammonium, biuret and solution homogeneity - measured in seconds, continuously, with no reagents.
Urea, ammonium nitrate and the unwanted biuret by-product in aqueous nitrogen fertilizers and AUS 32 (DEF/AdBlue).
The main component of both UAN/RSM and DEF - measured live instead of inferred after the batch.
The core of the Spectrally platform, and strong inline in water because water is a weak Raman scatterer.
Immersion probe in the reactor, pipeline or mixer, feeding your PLC / DCS continuously.
Everything a nitrogen or DEF plant asks us - one page per answer.
Six focused pages: the chemistries we cover, the parameters we read, how the measurement works, the feasibility results behind it, the regulatory context and the instrument itself.
The line does not wait for the lab.
Refractometry answers in 2 to 3 minutes but reads only total dissolved solids - it cannot separate urea from ammonium nitrate and never sees biuret. The methods that can are slow: Kjeldahl total nitrogen takes 60 to 90 minutes, biuret by GC 40 to 60. By then the blend or the batch has moved on.
Sample, walk to the lab, run Kjeldahl, GC or titration, wait, report. A urea-concentration or %N deviation only surfaces as an off-spec blend at your customer - after the product has shipped. Off-spec DEF misses the ISO 22241 window and the liability lands on the producer.
The probe reads the reactor, pipeline or mixer continuously and streams urea, nitrate, ammonium and biuret to your control system. The deviation is caught while you can still correct it - so the offline methods become verification, not the bottleneck.
Spectrum to a process value, continuously.
Composition resolved down to single ppm.
System CAPEX 75 to 250k EUR - no reagents, no consumables.
Typical from feasibility to line, 3 to 5.5 months.
Put it on your line - starting with your own samples.
Send representative samples or process data from your urea, UAN/RSM, DEF/AdBlue or ATS stream. We build and validate a chemometric model on your matrix and show you exactly what inline Raman would read on your line - before any commitment. Your feasibility study returns the exact figures for your material, modeled and validated on your own samples.